smart-fire-iot-platform/expands-components/jetlinks-media/srs/srs.conf

listen              1935;
max_connections     1000;
srs_log_tank        file;
srs_log_file        ./objs/srs.log;
daemon              off;
http_api {
  enabled         on;
  listen          1985;
  raw_api {
    # whether enable the HTTP RAW API.
    # default: off
    enabled             on;
    # whether enable rpc reload.
    # default: off
    allow_reload        on;
    # whether enable rpc query.
    # default: off
    allow_query         on;
    # whether enable rpc update.
    # default: off
    allow_update        on;
  }
}
http_server {
  enabled         on;
  listen          8080;
  dir             ./objs/nginx/html;
}
stats {
  network         0;
  disk            sda sdb xvda xvdb;
}

stream_caster {
  enabled             on;
  caster              gb28181;

  # 转发流到rtmp服务器地址与端口
  # TODO: https://github.com/ossrs/srs/pull/1679/files#r400875104
  # [stream] is VideoChannelCodecID(视频通道编码ID) for sip
  # 自动创建的道通[stream] 是‘chid[ssrc]’ [ssrc]是rtp的ssrc
  # [ssrc] rtp中的ssrc
  output              rtmp://127.0.0.1:1935/live/[ssrc];

  # 接收设备端rtp流的多路复用端口
  listen              9000;

  # rtp接收监听端口范围，最小值
  rtp_port_min        58200;
  # rtp接收监听端口范围，最大值
  rtp_port_max        58300;

  # 是否等待关键帧之后，再转发，
  # off:不需等待，直接转发
  # on:等第一个关键帧后，再转发
  wait_keyframe       on;

  # rtp包空闲等待时间，如果指定时间没有收到任何包
  # rtp监听连接自动停止，发送BYE命令
  rtp_idle_timeout    30;

  # 是否转发音频流
  # 目前只支持aac格式，所以需要设备支持aac格式
  # on:转发音频
  # off:不转发音频，只有视频
  # *注意*!!!:flv 只支持11025  22050  44100 三种
  # 如果设备端没有三种中任何一个，转发时为自动选择一种格式
  # 同时也会将adts的头封装在flv aac raw数据中
  # 这样的话播放器为自动通过adts头自动选择采样频率
  # 像ffplay, vlc都可以，但是flash是没有声音，
  # 因为flash,只支持11025 22050 44100
  audio_enable        on;

  # 是否开启rtp缓冲
  # 开启之后能有效解决rtp乱序等问题
  jitterbuffer_enable  on;

  # 服务器主机号，可以域名或ip地址
  # 也就是设备端将媒体发送的地址，如果是服务器是内外网
  # 需要写外网地址，
  # 调用api创建stream session时返回ip地址也是host
  # $CANDIDATE 是系统环境变量，从环境变量获取地址，如果没有配置，用*
  # *代表指定stats network 的网卡号地址，如果没有配置network，默认则是第0号网卡地址
  # TODO: https://github.com/ossrs/srs/pull/1679/files#r400917594
  host       host.docker.internal;

  #根据收到ps rtp包自带创建rtmp媒体通道，不需要api接口创建
  #rtmp地址参数[stream] 就是通道id  格式chid[ssrc]
  auto_create_channel   on;

  sip {
    # 是否启用srs内部sip信令
    # 为on信令走srs, off 只转发ps流
    enabled off;

    # sip监听udp端口
    listen              5060;

    # SIP server ID(SIP服务器ID).
    # 设备端配置编号需要与该值一致，否则无法注册
    serial              34020000002000000001;

    # SIP server domain(SIP服务器域)
    realm               3402000000;

    # 服务端发送ack后，接收回应的超时时间，单位为秒
    # 如果指定时间没有回应，认为失败
    ack_timeout         30;

    # 设备心跳维持时间，如果指定时间内(秒）没有接收一个心跳
    # 认为设备离线
    keepalive_timeout   120;

    # 注册之后是否自动给设备端发送invite
    # on: 是  off 不是，需要通过api控制
    auto_play           on;
    # 设备将流发送的端口，是否固定
    # on 发送流到多路复用端口 如9000
    # off 自动从rtp_mix_port - rtp_max_port 之间的值中
    # 选一个可以用的端口
    invite_port_fixed     on;

    # 向设备或下级域查询设备列表的间隔，单位(秒)
    # 默认60秒
    query_catalog_interval  60;
  }
}

vhost __defaultVhost__ {
  hls {
    enabled         off;
  }
  http_remux {
    enabled     on;
    mount       [vhost]/[app]/[stream].flv;
  }
  rtc {
    enabled     on;
    bframe      discard;
  }
  http_hooks {
    # whether the http hooks enable.
    # default off.
    enabled         on;
    # when client connect to vhost/app, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_connect",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "tcUrl": "rtmp://video.test.com/live?key=d2fa801d08e3f90ed1e1670e6e52651a",
    #           "pageUrl": "http://www.test.com/live.html"
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
    # support multiple api hooks, format:
    #       on_connect http://xxx/api0 http://xxx/api1 http://xxx/apiN
    # @remark For SRS4, the HTTPS url is supported, for example:
    #       on_connect https://xxx/api0 https://xxx/api1 https://xxx/apiN
    on_connect      http://host.docker.internal:8844/media/srs/notify/on_connect;
    # when client close/disconnect to vhost/app/stream, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_close",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "send_bytes": 10240, "recv_bytes": 10240
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
    # support multiple api hooks, format:
    #       on_close http://xxx/api0 http://xxx/api1 http://xxx/apiN
    # @remark For SRS4, the HTTPS url is supported, for example:
    #       on_close https://xxx/api0 https://xxx/api1 https://xxx/apiN
      on_close        http://host.docker.internal:8844/media/srs/notify/on_close;
    # when client(encoder) publish to vhost/app/stream, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_publish",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "stream": "livestream", "param":"?token=xxx&salt=yyy"
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
    # support multiple api hooks, format:
    #       on_publish http://xxx/api0 http://xxx/api1 http://xxx/apiN
    # @remark For SRS4, the HTTPS url is supported, for example:
    #       on_publish https://xxx/api0 https://xxx/api1 https://xxx/apiN
    on_publish      http://host.docker.internal:8844/media/srs/notify/on_publish;
    # when client(encoder) stop publish to vhost/app/stream, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_unpublish",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "stream": "livestream", "param":"?token=xxx&salt=yyy"
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
    # support multiple api hooks, format:
    #       on_unpublish http://xxx/api0 http://xxx/api1 http://xxx/apiN
    # @remark For SRS4, the HTTPS url is supported, for example:
    #       on_unpublish https://xxx/api0 https://xxx/api1 https://xxx/apiN
      on_unpublish    http://host.docker.internal:8844/media/srs/notify/on_unpublish;
    # when client start to play vhost/app/stream, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_play",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "stream": "livestream", "param":"?token=xxx&salt=yyy",
    #           "pageUrl": "http://www.test.com/live.html"
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
    # support multiple api hooks, format:
    #       on_play http://xxx/api0 http://xxx/api1 http://xxx/apiN
    # @remark For SRS4, the HTTPS url is supported, for example:
    #       on_play https://xxx/api0 https://xxx/api1 https://xxx/apiN
    on_play      http://host.docker.internal:8844/media/srs/notify/on_play;
    # when client stop to play vhost/app/stream, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_stop",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "stream": "livestream", "param":"?token=xxx&salt=yyy"
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
    # support multiple api hooks, format:
    #       on_stop http://xxx/api0 http://xxx/api1 http://xxx/apiN
    # @remark For SRS4, the HTTPS url is supported, for example:
    #       on_stop https://xxx/api0 https://xxx/api1 https://xxx/apiN
      on_stop    http://host.docker.internal:8844/media/srs/notify/on_stop;
    # when srs reap a dvr file, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_dvr",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "stream": "livestream", "param":"?token=xxx&salt=yyy",
    #           "cwd": "/usr/local/srs",
    #           "file": "./objs/nginx/html/live/livestream.1420254068776.flv"
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
    on_dvr      http://host.docker.internal:8844/media/srs/notify/on_dvr;
    # when srs reap a ts file of hls, call the hook,
    # the request in the POST data string is a object encode by json:
    #       {
    #           "action": "on_hls",
    #           "client_id": 1985,
    #           "ip": "192.168.1.10", "vhost": "video.test.com", "app": "live",
    #           "stream": "livestream", "param":"?token=xxx&salt=yyy",
    #           "duration": 9.36, // in seconds
    #           "cwd": "/usr/local/srs",
    #           "file": "./objs/nginx/html/live/livestream/2015-04-23/01/476584165.ts",
    #           "url": "live/livestream/2015-04-23/01/476584165.ts",
    #           "m3u8": "./objs/nginx/html/live/livestream/live.m3u8",
    #           "m3u8_url": "live/livestream/live.m3u8",
    #           "seq_no": 100
    #       }
    # if valid, the hook must return HTTP code 200(Status OK) and response
    # an int value specifies the error code(0 corresponding to success):
    #       0
      on_hls        http://host.docker.internal:8844/media/srs/notify/on_hls;
    # when srs reap a ts file of hls, call this hook,
    # used to push file to cdn network, by get the ts file from cdn network.
    # so we use HTTP GET and use the variable following:
    #       [app], replace with the app.
    #       [stream], replace with the stream.
    #       [param], replace with the param.
    #       [ts_url], replace with the ts url.
    # ignore any return data of server.
    # @remark random select a url to report, not report all.
    on_hls_notify   http://host.docker.internal:8844/media/srs/notify/hls_[app]_[stream]_[ts_url]/[param];
  }
}